Pinball and arcade machines for sale in Sydney
We occasionally sell machines from our collection. Keep an eye on our restorations page to see what machines may be coming up for sale in the future!
Current machines for sale
Cyber Cycles twin bike (Namco, 1995)
For sale is my 1995 Cyber Cycles twin bike by Namco. This game is in good overall condition and is working well. I have fully cleaned this game inside and out and given it a thorough go-over. It was in poor condition when I received it but after a lot of work, it presents nicely. This an an LAI-built game and features the standard cabinet with a central tower supporting the topper, and two monitors mounted on pedestals.
The monitors are 29" Toshibas with Nanao MS9-29A chasses. One of the chasses was not working and was sent to Jomac for overhaul and it works like new now. Both monitors nice and bright with no burn-in.
The topper has had a hard life. It has cracks in several places but these have been repaired. Only one small section of the front plastic is missing (top left). The traffic lights are both complete. The fluoro tube, ballast and fan in the topper were all replaced. Incandescent lamps were also replaced with LEDs.
The fluoro tube in the tower was also replaced. The power supplies are mounted in the tower and one was rebuilt as some of the caps has begun to bulge. Delivering nice solid voltages now.
In the bottom of the tower are the board stack cages. These were thoroughly cleaned. A couple of the boards presented with graphics faults, there were some sound issues with the CPU, and one of the amplifiers had failed. These were all repaired by Jomac. New ventilation fans were installed on both board cages. The wiring loom in this part of the cabinet was also repaired and given a tidy-up.
In terms of the bikes, they have both been cleaned and all switches and potentiometers are working. One of the bike speakers was replaced. The bikes are fully functional but note that the large plastic pieces which cover the base of the bikes are missing. One of the speaker covers has also been replaced with a different grille. New handlebar covers were also installed. The metal checker plates were thoroughly cleaned; they shine like new now!
Manual is included. Game is currently set to free play. Also comes with two S6 coin mechanisms however they are not installed. If you want it set to coin operation I can do this for an extra cost. For transport, the game comes apart into multiple pieces for easier moving. It is located in Ambarvale 2560. I can help disassemble and load up if necessary.
The monitors are 29" Toshibas with Nanao MS9-29A chasses. One of the chasses was not working and was sent to Jomac for overhaul and it works like new now. Both monitors nice and bright with no burn-in.
The topper has had a hard life. It has cracks in several places but these have been repaired. Only one small section of the front plastic is missing (top left). The traffic lights are both complete. The fluoro tube, ballast and fan in the topper were all replaced. Incandescent lamps were also replaced with LEDs.
The fluoro tube in the tower was also replaced. The power supplies are mounted in the tower and one was rebuilt as some of the caps has begun to bulge. Delivering nice solid voltages now.
In the bottom of the tower are the board stack cages. These were thoroughly cleaned. A couple of the boards presented with graphics faults, there were some sound issues with the CPU, and one of the amplifiers had failed. These were all repaired by Jomac. New ventilation fans were installed on both board cages. The wiring loom in this part of the cabinet was also repaired and given a tidy-up.
In terms of the bikes, they have both been cleaned and all switches and potentiometers are working. One of the bike speakers was replaced. The bikes are fully functional but note that the large plastic pieces which cover the base of the bikes are missing. One of the speaker covers has also been replaced with a different grille. New handlebar covers were also installed. The metal checker plates were thoroughly cleaned; they shine like new now!
Manual is included. Game is currently set to free play. Also comes with two S6 coin mechanisms however they are not installed. If you want it set to coin operation I can do this for an extra cost. For transport, the game comes apart into multiple pieces for easier moving. It is located in Ambarvale 2560. I can help disassemble and load up if necessary.
Previous machine sales
2021
Lighthouse prize redemption arcade machine (LAI Games, 2002)
For sale is a Lighthouse prize redemption arcade machine by LAI. One of the best earners in any arcade! This would suit anyone who wants a reliable, clean and fully working machine. It has been thoroughly cleaned and checked for proper operation. Below is a short summary of what you get with this machine.
Specific repair and restoration tasks included:
Note that the pictures do not show the metal panel in front of the ticket dispenser, however, the machine does come with a panel. Ticket dispenser not included. The images below show the end result of the restoration and repair process.
- Fully cleaned inside and out
- Installed new LED lamps in the lighthouse assembly
- Installed four new locks (keyed alike)
- Checked all flasher lamps around the lighthouse
- Checked prize sensor opto switches
- Checked all eight prize dispensers
- Checked and repaired circuit boards as necessary
- Installed one QL coin mechanism, connected to universal credit board
- Includes original operating manual
Specific repair and restoration tasks included:
- Replacement of lighthouse beacon motor
- Replacement of driving triac for Level 3 lamp on lamp driver board
- Installation of correctly rated fuses
Note that the pictures do not show the metal panel in front of the ticket dispenser, however, the machine does come with a panel. Ticket dispenser not included. The images below show the end result of the restoration and repair process.
2020
Fast Gunman 2 shooting gallery arcade game (Dragonwin, 2010)
For sale are several Fast Gunman 2 shooting gallery arcade games by Dragonwin Animation Technology (2010). There are two styles of cabinet, and I have several of each. The first cabinet style is a green cabinet which features coloured bottle targets. The second is a blue cabinet which features silver skull targets. Gameplay is the same for each style of cabinet, although the sound effects for each target hit are different. The cabinets are in two parts, consisting of a pedestal from which the player shoots, and a main cabinet which houses the moving targets. The two parts are connected via cables which are run across the ground. Each cabinet has been thoroughly cleaned, checked and tested for proper operation. I have performed a number of repairs on each of these cabinets to ensure they are fully operational. Some spare parts are included with each machine. These spare parts include spare target opto boards, gun controllers, power supplies, and speaker amplifiers. Power cable, leg levellers, keys, and manual included with each cabinet.
Cabinet style 1: bottles
Cabinet style 2: skulls
Gameplay videos
2017
Doctor Who pinball machine (Bally, 1992)
For sale is my recently restored Doctor Who pinball machine by Bally (1992). Feel free to view the restoration blog entry relating to this machine.
Cabinet - Exterior
Good condition overall. Some minor nicks and scratches are present and decals are faded. Thoroughly cleaned and vacuumed. Legs repainted. Felt cabinet protectors installed. Damaged cabinet gliders replaced. New Launch Ball button installed. Coin door repainted. Playfield glass cleaned. New playfield glass channel installed. The Dalek topper on this game was vandalised at some point so it has been removed. The top half of the Dalek head and the clear dome covering it were both destroyed. However, the lower half of the Dalek and all necessary wiring for lighting will be included with the machine should you wish to reinstall it.
Cabinet - Backbox
Excellent condition overall. Thoroughly cleaned and vacuumed. All circuit boards checked and serviced as necessary. Good voltages present at all test points. Incorrect fuses replaced with correctly rated ones. Burned connectors repaired. Failed components (one bridge rectifier) replaced. Dot matrix display is nice and bright with no lines missing. Translite is in great condition with only a couple of small holes in it at the top right corner. Speaker panel cleaned and polished.
Cabinet - Interior
Excellent condition overall. Thoroughly cleaned and vacuumed. Wiring loom cleaned and wrapped in conduit. Flipper button and flipper switches cleaned. Missing tilt assembly installed.
Playfield - Topside
Very good condition overall. Minor damage to plastics. Playfield thoroughly cleaned, repaired and waxed. All major playfield assemblies disassembled, cleaned, and reinstalled. Ramps cleaned and polished. Wireforms cleaned and polished. Plastics cleaned and polished. Targets cleaned and adjusted as necessary. Playfield switches checked and adjusted as necessary. New lamps installed. New rubbers installed (including flippers). Balls cleaned and polished. Cliffy protectors installed.
This playfield is in fantastic condition and really shines. There is no fading to be seen and the colours in the artwork are nice and bright. This game plays lightning fast now as a result of the cleaning and waxing. Typical wear near the mini playfield has been repaired and protected with Cliffy protectors so you won't need to worry about damaging the playfield. The two slingshot plastics are chipped at the bottom edges. The Cliffhanger ramp is also cracked slightly in the usual location. New ramps and plastics can be installed if desired (additional cost).
Playfield - Underside
Excellent condition overall. All under-playfield assemblies disassembled, cleaned and reinstalled. Flipper assemblies serviced and rebuilt (3). Pop bumpers serviced and rebuilt (3). Slingshots serviced and rebuilt (2). All other coil assemblies serviced and rebuilt. All metal parts cleaned. All inserts cleaned. The Time Expander mini playfield was totally disassembled, serviced, and rebuilt. This included new grease on all bearings, repairs to the opto board, and repairs to the front edge of the playfield. The mini playfield moves up and down smoothly and works as it should.
Miscellaneous
Two coin mechanisms have been installed in the coin door. Original game manual and Operator's Handbook included. Coin box included. The game has incandescent lamps installed. I can upgrade the game to LEDs if desired (additional cost).
Cabinet - Exterior
Good condition overall. Some minor nicks and scratches are present and decals are faded. Thoroughly cleaned and vacuumed. Legs repainted. Felt cabinet protectors installed. Damaged cabinet gliders replaced. New Launch Ball button installed. Coin door repainted. Playfield glass cleaned. New playfield glass channel installed. The Dalek topper on this game was vandalised at some point so it has been removed. The top half of the Dalek head and the clear dome covering it were both destroyed. However, the lower half of the Dalek and all necessary wiring for lighting will be included with the machine should you wish to reinstall it.
Cabinet - Backbox
Excellent condition overall. Thoroughly cleaned and vacuumed. All circuit boards checked and serviced as necessary. Good voltages present at all test points. Incorrect fuses replaced with correctly rated ones. Burned connectors repaired. Failed components (one bridge rectifier) replaced. Dot matrix display is nice and bright with no lines missing. Translite is in great condition with only a couple of small holes in it at the top right corner. Speaker panel cleaned and polished.
Cabinet - Interior
Excellent condition overall. Thoroughly cleaned and vacuumed. Wiring loom cleaned and wrapped in conduit. Flipper button and flipper switches cleaned. Missing tilt assembly installed.
Playfield - Topside
Very good condition overall. Minor damage to plastics. Playfield thoroughly cleaned, repaired and waxed. All major playfield assemblies disassembled, cleaned, and reinstalled. Ramps cleaned and polished. Wireforms cleaned and polished. Plastics cleaned and polished. Targets cleaned and adjusted as necessary. Playfield switches checked and adjusted as necessary. New lamps installed. New rubbers installed (including flippers). Balls cleaned and polished. Cliffy protectors installed.
This playfield is in fantastic condition and really shines. There is no fading to be seen and the colours in the artwork are nice and bright. This game plays lightning fast now as a result of the cleaning and waxing. Typical wear near the mini playfield has been repaired and protected with Cliffy protectors so you won't need to worry about damaging the playfield. The two slingshot plastics are chipped at the bottom edges. The Cliffhanger ramp is also cracked slightly in the usual location. New ramps and plastics can be installed if desired (additional cost).
Playfield - Underside
Excellent condition overall. All under-playfield assemblies disassembled, cleaned and reinstalled. Flipper assemblies serviced and rebuilt (3). Pop bumpers serviced and rebuilt (3). Slingshots serviced and rebuilt (2). All other coil assemblies serviced and rebuilt. All metal parts cleaned. All inserts cleaned. The Time Expander mini playfield was totally disassembled, serviced, and rebuilt. This included new grease on all bearings, repairs to the opto board, and repairs to the front edge of the playfield. The mini playfield moves up and down smoothly and works as it should.
Miscellaneous
Two coin mechanisms have been installed in the coin door. Original game manual and Operator's Handbook included. Coin box included. The game has incandescent lamps installed. I can upgrade the game to LEDs if desired (additional cost).
World Cup Soccer pinball machine (Bally, 1994)
For sale is my recently restored World Cup Soccer pinball machine by Bally (1994). Feel free to view the restoration blog entry relating to this machine.
2016
Fish Tales pinball machine (Williams, 1992)
For sale is my recently restored Fish Tales pinball machine by Williams (1992). Feel free to view the restoration blog entry relating to this machine.
2015
Doctor Who pinball machine (Bally, 1992)
For sale is my recently restored Doctor Who pinball machine by Bally (1992). Feel free to view the restoration blog entry relating to this machine.
