ο»ΏRepair logs are quick summaries of workshop and on-site repairs. If your machine needs a service, π¬ Contact Us to discuss how we can help!
ο»Ώ
Service call to a Stern Playboy a couple of days ago. I took the MPU board in for repair to abate some alkaline corrosion from leaking batteries. Replaced with a lithium cell and installed NVRAM while I was there.
Little bit of work to do on the playfield, too. The triangle motor wasn't stopping at the correct spots for "Splash" and "Triple Jackpot" awards. The switches underneath the assembly were out of adjustment. The clear plastic above the left ramp was missing. This resulted in shots to the ramp getting rejected most of the time. I fashioned a new plastic out of polycarbonate, drilled the mounting holes, and voila! Not as precise as a CNC cut plastic, sure, but not bad for an on-site repair either! Also installed a custom topper and wired it into the backbox. Changed a few rubbers and replaced a couple of switches to finish things off.
Welcome back to the mansion!
