Repair logs are quick summaries of workshop and on-site repairs. If your machine needs a service, 📬 Contact Us to discuss how we can help!


Image description


Another Centaur II to repair. The first thing to work on here was the drop targets. Somebody had ripped out the original drop target assembly and replaced it with a Gottlieb one. Sacrilege! Luckily, the owner had tracked down an original Bally mechanism which he wanted to have installed. Old assembly had to be removed, with switches transferred to the new assembly. Connector was full of liquified PVC insulation so some of the crimps had to be replaced as well. New drop targets and new springs put in while we are at it. Looks much better!


Some trough issues. The game would occasionally lose track of balls or not eject all balls properly during multiball. Bit of fiddling around to solve this one. Trough kicker was serviced, connectors all checked, switches all seemed to register OK, but the problem ended up being bad wiring on the trough switches. It was breaking off easily, with a couple of wires hanging on by a thread. Wires stripped and soldered back on. Back in business.


Did some work in the backbox too. Rebuilt the connectors on the solenoid driver board as they were all original. The rest of the board had been rebuilt previously. This game had an Alltek MPU in it so no corrosion to worry about here.


Some small switch adjustments done and the game was ready to play again. Bad move, human...