Tags

  • Published on

    Super Mario Bros

    1992 Gottlieb Super Mario Bros
    Picture

    You might have read the blog post on Pinfest 2022 with a little confusion. I talked about bringing a Super Mario Bros (Gottlieb, 1992) machine to Pinfest. But I have never mentioned owning a Super Mario Bros machine before, and there certainly hasn't been any restoration blog posts about the machine. What gives?

    ​I had actually purchased this machine a couple of years ago from a young couple who also lived in Sydney. They had bought the machine over a decade ago and it had been sitting in the basement of their house for some time, rarely played because it had various issues. They offered it to me for a reasonable price and as I was looking to get more experience repairing Gottlieb machines, I was keen to take them up on their offer! Below are a few images of the game as provided by the seller. 

  • Published on

    Pinfest 2022

    Events Pinfest Super Mario Bros
    Picture

    Life has been busy over the last few months so it has taken me a while to finally write a report on Pinfest 2022. Better late than never, so here it is! 2022 was the first year since the pandemic that things were back to "normal". Machines were set up so the venue was at capacity and social distancing was no longer mandatory. Ticket sales for each session were capped, but this was more to ensure everyone had a chance to play the machines rather than a limit set due to Covid restrictions. Pinfest 2021 was a great show, but it did feel a little emptier than usual, so Fiona and I were excited to get back into the swing of things properly.
  • Published on

    Cyber Cycles

    1995 Arcade Cyber Cycles Namco
    Picture

    It's not often I work on arcade machines, but after grabbing this Cyber Cylces (Namco, 1995) as a part of a bulk arcade machine deal, I found that it was in need of a fair bit of work. So, I figured this blog post would be a good way to record the journey of learning about this game and board system. The pinball purists will have to forgive me, but even though I am a pinball die hard I still have a soft spot for video arcade games, particularly driving cabs. Cyber Cycles runs on Namco's Super System 22 hardware system, which I would say is a difficult system to repair due to a lack of schematics and general repair information. However, if I decided to sell this game, it would need to be in good working condition for the next owner, so I figure that posting some of my successes (and failures) during this repair may help out other Cyber Cycles owners in the future. Jump on, and let's ride...
  • Published on

    Jurassic Park (Data East)

    1993 Data East Jurassic Park
    Picture

    I haven't had to do a full restoration on a Data East machine in a little while, so it was about time one came around. Enter Jurassic Park! This machine came from a customer who had this machine sitting in their garage. They had just moved house and wanted the machine brought back into playing condition so they could play it in their new house. As expected, the Jurassic Park was much older than the house, and was also in much poorer condition. The game did start up and enter attract mode, but a lot of playfield features did not work and a lot of parts were broken. This was going to be a full-on restoration, and I wanted to add a few little touches to really bring the machine back to its former glory. ​So, if this pinball machine was 65 million years in the making, then I was in it for the long haul with this restoration.
  • Published on

    Bally Star Trek Circuit Board Repairs

    1979 Bally Circuit Board Repair Star Trek
    Picture

    I've been repairing a few classic Bally games lately, so it's only fitting that this one came into my care recently. Star Trek (Bally, 1979) has some cool playfield features including a saucer which spits the ball out into the pop bumpers, and a free ball return lane. Star Trek appears to be the only Bally solid state game that had a free ball return lane feature, and it was a great way to rack up scores by collecting bonuses continuously. The "Where No Man Has Gone" horseshoe at the top left of the playfield was also a cool gimmick, causing the left pop bumper to fire the ball back at the left flipper.

    This will be a relatively short blog post as this restoration was focused mainly on circuit board repairs and upgrades. Only minor playfield repairs were conducted, and the machine was otherwise in good, playing condition. The playfield was stripped and cleaned, various broken parts were replaced, and the flipper assemblies were also rebuilt. However, there's nothing particularly exciting about any of that. Instead, I intend for this blog post to serve as a generic reference for those troubleshooting classic Bally boardsets and to explain some of the basic modifications and upgrades I perform.
  • Published on

    Pinfest 2021

    Demolition Man Events Pinfest
    Picture

    ​Well, the last couple of years have been rough! Last year was the first time Fiona and I had missed out on Pinfest since we first attended in 2015. By the end of 2020, the COVID pandemic was in full swing and travelling hours away for a weekend was just not an option for us. Regardless, Pinfest 2020 still went ahead, albeit at a reduced capacity and with fewer games. I was bummed that I couldn't go to my favourite event of the year, and promised that we would be back in 2021 when the pandemic had completely blown over...